Fast Setting using Google Play TuyaSmart free app, easy and fast adding new detector and devices, WiFi Remote Access Mode, WiFi Smart Alarm Panel hot spot mode & Alarm Panel. Easy APP operation and easy device function setting, easy zone programming settings. 100% wireless two-way device communication, safe encryption.
Detection distance not more than 8m, wireless transmitting distance 150m in open air. Up to fifty (50) wireless smart devices can be added, and each device with individual function settings and individual programming settings. Low power-consumption design, device will automatically enter low power consumption operation state without triggering, can check online or off device battery charge status.Intelligent scene recognition, no door reminder. Silent mode can be set. Defense zones supported include Disarm, Arm, Home Arm, 24H Arm, Delay Arm. Built-in GSM module, can alarm normally even if power off in GSM mode.
Notification when power off or incoming call. SIM card slot accessible on rear panel.
Support wired siren interface terminals, support security lighting control interface. Smart Alarm Panel support battery charger USB port, Input DC5V/2A & battery ON/OFF switch. When System Armed, Arm Indicator is Normally ON and Voice Notification System Armed , any intruders will trigger alarm.
The System can Arm by the ways listed below. Press ARM key on Remote Control. Sending SMS message User code +1# to the SIM card in the Alarm Host Panel. TuyaSmart app graphic user interface. When System Disarmed, the ARM light is OFF and Voice Notification The system is disarmed, the alarm is cancelled, and it is in the disarmed state. The System can be Disarmed by the methods listed below. Press DISARM key on Remote Control.Sending SMS message User code +2# to the SIM card in the Alarm Host Panel. When System is in Home Arm Status, the ARM light is always ON and Voice Notification System Home Armed, the valid wireless devices are activated for this status, if intruders detected whilst at home system will alarm. The methods to operate HOME ARM listed below.
Press HOME ARM key on Remote Control. Sending SMS message User code +3# to the SIM card in the Alarm Host Panel.
In emergency, press SOS key on the Remote Control to trigger alarming. When alarm is triggered, the host Smart Alarm Panel will automatically dial all pre-set numbers. Answer the call, you will hear Alarm Voice to help you the realise situation, during this time you can. Press [1]: Stop alarming, system armed, host stop calling.
Press [2]: Stop alarming, system disarm, host stop calling. Press [3]: Live monitoring on the.Press [4]: Live Voice Intercom. Press [3]: Read alarm message.
You can answer the call only, hear the alarm voice message, and then hang up, then the host will continue to dial other numbers till someone answers and do the above operations, if no answer the host will continue dialling all numbers 3 times, then stop automatically. Then you can do the following operations. After factory reset, the network needs to be reconfigured, all sensors are removed, and all settings will be restored to the factory default settings.Optional ZigBee Wireless 2.4GHz IEEE 802.15.4 protocol smart products, TUYA connectivity & TUYA Smart App Remote View. Wireless Temperature & Humidity Detector.
Package Info Ref # 4635. Gift Box Size: 16416475mm 1pcs. Gift Box Gross Weight: 1kg.Carton Box Gross Weight: 22kg. Number of Carton Box: 5No. Gross Carton Box Weight: 110kg. Gross Carton Box Volume: 0.502m³ (0.502 CBM).
Minimum order quantity is 100pcs. CIF DDP SEA CN-AU Adelaide [Included].The item "Zigbee Wireless Alarm Kit Smart Home Automation Security GSM Alarm System" is in sale since Saturday, July 18, 2020. This item is in the category "Home & Garden\Home Security\Alarm Systems".
The seller is "groussos-cctv" and is located in ADELAIDE. This item can be shipped worldwide.