Hassle-free Wireless Light Switch Kit Economic: Save wire, pipes and labor cost. Environmentally friendly: No Battery, No Dust, No Noise. Easy: No more complicated wiring, build your switch system quickly. Flexible: Easy to add or remove a switch or receiver in the switch system. Durable: IP66 water resistance, up to 20 years lifetime.
One switch can be paired with multiple receivers simultaneously. One receiver can be paired with up to 8 switches. Encrypted connection, no signal interferences between switches.
Up to 1640ft (500m) wireless range in open area, 130ft (40m) wireless range indoor with obstacles. The strong signal can easily go through walls. Blue LED indicator shows you the working status of the switch.
Light fluorescence of the indicator helps you to find your switch easily in dark environments. Your switch is always by your side.
Works great in wet environments like bathroom and courtyard. Self-powered switch with CR2032 button lithium battery (included), up to 20 years lifetime. No need to rebuild your switch system, the wireless switch is also compatible with the traditional wired switch. (Need to turn on the traditional wall switch first).Place this switch anywhere you want or use as portable remotes. More convenient for the elders, pregnant woman, disables and children. CR2032 button lithium battery (included). Intensity of pressing of panel. 86 x 86 x 11mm/ 3.38 x 3.38 x 0.43in. 39 x 23 x 22mm/ 1.53 x 0.9 x 0.86in. Step-1: Connect the receiver between the light and the power source.
Step-2: Power on electricity, press and hold the setting button for 2 seconds. When the indicator light flashes, it enters into matching code mode, then loosen your finger. Step-3: Press the wireless switch button that you want to pair.Use the wireless switch to control the light on or off, indicating that the learning code is successful. (Note: To avoid danger, please turn off all the power and test the power is off before wiring). Adding a switch from a paired switch. Step-1: Press and hold the paired switch panel for about 20s till the LED indicator on switch blinks rapidly. Step-3: Press the new switch. Adding a receiver from a paired switch. Step-1: Press and hold the button on the new receiver you want to add for about 3s till the LED indicator on the receiver blinks. Step-3: Press the paired switch. 1 x 1-Gang Wireless Switch.
1 x 2-Gang Wireless Switch. 1 x Double-sided Adhesive Tape.
The item "Wreless Wall Switch 433MHz Remote Control Samrt Home Automation Kit Waterproof 2" is in sale since Thursday, July 1, 2021. This item is in the category "Home & Garden\Lamps, Lighting & Ceiling Fans\Lighting Parts". The seller is "superinktoner" and is located in South El Monte, California. This item can be shipped to United States.