(physical address in continental US only). This plug-n-play temperature and humidity controller with Wi-Fi connectivity can be used for sausage curing, green houses, incubator and other similar applications. It can control both temperature (heating or cooling) and humidity (humidifying or dehumidifying) at the same time. It can display the temperature unit in either Celsius or Fahrenheit.The controller has a two-line LED display, two output sockets, one sensor module and one input power cord. The top display shows the measured temperature value and the bottom display shows the measured humidity value. The left output socket is for heating/cooling devices, and the right output socket is for a humidifier/dehumidifier. The sensor module contains both temperature and humidity sensors. This controller can be used in high relative humidity (>85%) and condensing environments, which are among the most challenging conditions for humidity controllers.
For example, when controlling the humidity of a curing fridge at temperatures below the dew point of the ambient environment, opening the fridge door will cause water to condense on the sensor. When controlling the humidity at a humidity level that is close to 100%, slight temperature drop may also cause condensation on the sensor. Condensed water on the sensor can lead to unstable readings on most humidity sensors, including the one used in our TH102.
It can also damage the sensor. This new controller is equipped with one of the most robust Humidity Sensor on the market.
This controller can be operated via your smartphone through the Wi-Fi connection. Different than some old web based Wi-Fi controllers on the market, this controller is app based. The app based interface is more user friendly with more functions.It gives users a sense that their phones are integrated as a part of the controller. (As a good analogy, the difference between the web and app based interface is just like the experiences of finding the local weather information by using a weather app or by browsing the wheather. The Wi-Fi connectivity provides several more advantages and features than controllers without Wi-Fi integration. 1 Access the device remotely. As long as you have cellular or Wi-Fi internet access. Youll be able to monitor the device when you are not at home, doing grocery shopping, or traveling in another city. If your cellular provider disabled IPv4 internet, you cannot connect to the controller. IPv6 support will be ready by fall 2019. 2 Easy to view and analyze performance. Our app offers graphic plots to show the temperature and humidity data over the time. You can also export the data to a CSV file for further analysis. Setting up the control parameters through app is much easier than doing it from the keypad of the controller.
On the controller, the display is limited to four letters and the input is limited to three keys. To change parameters, you might also have to recheck the manual from time to time to learn what these parameters do. In contrast, when you change settings from the intuitive AuberSmart app, the function and the setting range of each parameter will be denoted on the screen to save the hassle of checking the operation manual.
The system has more functions and is easier to operates. Moreover, you can manage multiple devices from the Auber Smart Device family just with a few clicks. You will get a better user experience than web based interfaces of other Wi-Fi enabled devices. 5 Easy to configure Wi-Fi connection.In the old days, configuring a Wi Fi enabled device to the internet was a complicated task. It required extensive knowledge of networking and involved several steps. Now with the new technology we've used, the configuration is much simpler.
Once you put the controller in the Wi-Fi configuration mode (by pressing and holding two keys for 5 seconds), all you have to do is to enter your Wi-Fi password and then press the "Add Device", which is much easier than doing it from the keypad on a controller. The app will finish configuring the device within one minute. The main screen of the TH220-W in the AuberSmart App. Data plots of temperature in the past 2h and the humidity in the past 24h.
Screen shot of the Parameter Setting page. Every parameter name is followed by its definition. 0.1°C (between -9.9 80°C) 1°C (between -40 -10°C) 0.1°F (between -9.999.9°F) 1°F (between -40 -10°F, 100 176°F). 15 A, 120 V or 240 V AC.91 x 140 x 46 mm. 85 242 V AC, 50 Hz/60 Hz. The controller can display the temperature unit in Celsius or Fahrenheit. Unlike the PID controllers we sell, this on/off controller will not hold the temperature as tight if the system has very slow and delayed response. Some temperature overshot is normal.
Although both temperature and humidity output can handle up to 15Amp of power, the combined total power of the two channels are limited to 15A due to the limitation of input power cord. For TH220-W, the input power plug is a US NEMA 5-15P plug. The output power plug is US NEMA 5-15R socket.Keywords: sausage curing controller, environmental controller. In-app alarm function is enabled in the Aubersmart App (App is required to be running in the front). Push notification is currently not supported. It will be delivered about 1-2 weeks to Canada, 3-4 weeks to other countries. Bottom left is power input plug (5-15P). App name: Aubersmart (iOS or Android). The item "Wireless (WIFI) Plug-n-play Temperature & Humidity Controller (US FedEx 2-day)" is in sale since Friday, March 10, 2017.
This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics". The seller is "auberinstruments" and is located in Alpharetta, Georgia. This item can be shipped worldwide.