This plug-and-play PID temperature controller is for controlling the temperature of the electric smokers, such as Smokin-it®, Smokin Tex and Masterbuilt Smoker. It uses a PID algorithm to automatically adjust power to the heater to compensate disturbances from sunlight and wind. It can hold the smoking temperature within one degree precision.
App-based WIFI support is added to this model. Multi-steps programmable cooking temperature profile.Most durable and accurate probes. Up to three probes readouts. App based Wi-Fi interface for remote control. Easy to set up Wi-Fi configuration. This controller has three temperature sensor ports, 6 programmable steps, and an AC output that is synchronized with program step(s). Users can use the first probe to control the temperature of smoker cabinet.
The second pointed probe can be inserted into the food to monitor internal temperature. Optional third probe can be used to monitor one more internal temperature. The ending criteria of each step can be determined by either preset time, or preset internal food temperature (second probe). For cooking small sized foods or smoking the surface of the food, users can use the preset time as a reference point to finish the step. Using the internal temperature as the reference point is important for cooking large size food because it is difficult to know how much time is needed.For example: You can program the temperature to start at 120 °F for 1.5 hour of smoking, rise to 132 °F for 2.5 hours and finish at 190 °F until the internal temperature reaches 170 F. Then, the controller can either turn on a buzzer to let you know the food is ready, or drop the temperature to a lower set point to keep the food warm until you are ready to serve it. This will save you time waiting by the smoker to change the settings manually when each step is finished. The synchronized AC output can be used to turn on and off the smoker generator with the program step(s). For example, you can program the smoker to dry the sausage at 140F until the internal temperature reaches 100F (step 1), turn on a smoker generator for 2 hours at 150F (step 2), then, turn off the generator to continue the next step.
Up to two program steps can by synchronized with the AC output. Wi-Fi Connection: This controller can be operated via your smartphone through Wi-Fi connection. The app based interface is more user friendly with more functions. The Wi-Fi connectivity provides several more advantages and features than controllers without Wi-Fi integration. 1 Access the device remotely.As long as you have cellular or Wi-Fi internet access. Youll be able to monitor the device when you are not at home, or shopping for groceries. Asy to view and analyze the performance of your smoker. Our app offers graphic plots to show the temperature and output data over the time. You can also export the data to a CSV file for further analysis.
Setting up the control parameters through the app is much easier than doing it from the controller. On the controller itself, the information displayed can be very limited and using the four-key input is cumbersome. To change parameters, you might also have to recheck the manual from time to time to learn what these parameters do.In contrast, when you change settings from the intuitive AuberSmart app, the function and the setting range of each parameter will be denoted on the screen to save the hassle of checking the operation manual. The system has more functions and is easier to operates. Moreover, you can manage multiple devices from the AuberSmart device family just with a few clicks. You will get a better user experience than web based interfaces of other Wi-Fi enabled devices.
4 Easy to configure Wi-Fi connection Video: Android. In the old days, configuring a Wi-Fi enabled device to the internet was a complicated task. It required extensive knowledge of networking and usually took several steps. Now with the new technology we have used, the configuration is much simpler.The app will finish configuring the device within one minute. Temperature Probe: This controller has comes with three probes by default: Probe 1, which measures the temperature in the smoker cabinet.
The original free-hanging sensor can be fed through the venting hole and provides very accurate temperature reading. Probe 2, which measures the food internal temperature. Probe 3 (same as probe 2) is also included. The main screen in the AuberSmart App. Data plots of temperature in the past 2 hours.
Screen shot of the Parameter Setting page. Every parameter name is followed by its definition. US 120V, European 220V, 50/60 Hz. 15A for 120V AC, 12A for 220V AC. 5A for the smoke generator output.
PID, PI, PD or P. Built-in optically isolated solid state relay with zero voltage crossing switching. 4 mm diameter x 40 mm long.
4 mm diameter x 150 mm. (1.83 meter) (both of them). 6 steps with 0.1 to 99.9 hours for each step. 1 °C or 1 °F. 40-400 °C, or -40-750 °F.5 °C (9 °F) above ambient with smoker generator off, 22 °C (40 °F) above ambient with smoke generator on. 6x3x8.3 inch (150x80x210 mm) WxHxD.
3.2 lb (1.4 kg). 1 The socket for smoke generator is a. C13 female connector which is different from the NEMA 5-15 socket for heater.
It will prevent the users from mixing these two sockets up. A cable with C13 plug in one end and C14 on the other is included. 2 For customer outside of North America, t. His controller has US input plug and output socket that meet the NEMA 5-15 standard. For international order, user can get a converter from local electronics store to convert the connection.
The item "WIFI Electric Smoker Temperature Controller, 3 Probes, 1800 Watts" is in sale since Friday, February 9, 2018. This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics". The seller is "auberinstruments" and is located in Alpharetta, Georgia. This item can be shipped worldwide.