You can find these chips in latest home automation devices and consumer electronics. It is also hardware ready for 1.2V chips in future (with free software updates). Home automation electronics device firmware, bootloader etc. Car electronics & automotive (reprogramming modules, radio-code, immobilizers, gps navigations, mileage correction and other modules with serial EEPROM and/or FLASH memories).Computer and notebook service data recovery, reflashing, upgrading and programming BIOS chips in motherboards, copier & fax machines, printers, hdd & ssd sata drives etc. Network service (programming and cloning optical and ethernet SFP & SFP+ modules). RTV/AGD maintaining or repairing TV, digital cameras, tv tuners etc. And many other devices equipped with serial IIC / SPI / 1-Wire / Microwire EEPROM and SPI FLASH chips. Reading / writing / erasing functions with user-friendly application interface. Hex with possibility to load file to the buffer, edit it, calculate checksums, export changes as patterns, swap-bytes, compare with chip etc. Programming in socket or in external circuit (without unsoldering the chip - in system programming ISP). The target application device can be either powered by REVELPROG (possibility to change VPP and logic levels: 1.0V / 1.5V / 1.8V / 2.5V / 2.8V / 3.3V / 5.0V) or powered by an application with external power supply (1.0 5.5V). Build in additional protection: buffered I/O pins internal connected only during programming + short circuit and overload protection (reduces the risk of damaging parts due to connection mistake). All I/O internal-connected only during programming. Additional useful tools such as: user patterns, script programming (i2c & spi bus pirate), checksums etc.
Integrated sockets (ZIF + SOIC) with auto adaptive I/O pins reduces requirement of additional adapters. WINBOND W25Q80BV (8Mb): read 0.9s (8,4Mb/s), write 3.3s (2,4Mb/s), MICRON N25Q128A (128Mb): read 12.8s (10Mb/s), write 37.6s (3,4Mb/s), please check video programming examples. Software and firmware upgrades are freely available for all users on the Internet. Compatible protocols: IIC (I2C), SPI, 1-WIRE and MICROWIRE (uWire).
Supported device with 1.0V 5.0V power supply. Power supply and communication via USB 2.0 (hardware level, bulk transfer). Programming with external power supply (1.0 - 5.5V).Programming with internal power supply (1.0 - 5.0V, Imax = 100mA). Operation speed (read/write) up to 10Mbit/s. ZIF-32 + SOIC-8 (150mil) integrated sockets. Connector for in-circuit serial programming (ICSP) with buffered I/O. Auto adaptive I/O pins connected only for programming time (Hi-Z in IDLE state). All I/O connected only for programming time (Hi-Z in IDLE state).
Short circuit and overload protection. Software compatible with Windows XP, Vista, 7, 8 and 10 (32 and 64-bit). Device designed & manufactured in EU, made in Poland. The following list details the family of supported devices with selected examples of supported memories.Most chips have the same programming procedures programmer supports more devices than the examples given in the list. (write incremental register with higher value, erase and write remaining buffer). Compatible both addressing modes (8- and 16-bit). Supports low-voltage serial flash memories (1.2V, 1.8V, 2.5V) and standard (3.3V).
Supports low-voltage serial flash memories (1.8V) and standard (3.3V). SFP / SFP+ optical & ethernet modules. Please note that there is SFP adapter required with external power supply! SFP and SFP+, read/write block 0xA0 (256B), read block 0xA2 (256B), standard MSA Supports not secured chips - example manufacturers: GBC, HUAWEI, GPON, JDSU, MIKROTIK, OPTEC, OPTION, WTD and other OEM Possibility to change manufacturers info, model, serial number etc. And recalculate checksum directly from REVELPROG-IS application.
Software is compatible with MS Windows XP, Vista, 7, 8 and 10 (32 and 64-bit). It has all buffer editor functions and also additonal features commonly used in car electronics and IT, such as swap-bytes, calculate checksums, saving changes to external files (as patterns), custom scripts maker for I2C/SPI (bus pirate), SFP editor etc. All main functions can be run directly from shortcut icons. Updates are free of charge. Update consist of software update (pc application) and firmware update (software inside the device).
Latest software can be downloaded directly from our webpage. You will be informed by the software about possible updates after connecting out of date device. REVELPROG-IS serial device programmer (with built-in ZIF and SOIC-8 150mil sockets). Tape for ICSP programming (30cm). User Manual in PDF download REVELPROG-IS Manual.
REVELPROG-IS software download REVELPROG-IS Software. Optional accessories (not included in set). (SOIC-8 150mil is already built-in programmer).
The item "REVELPROG-IS SERIAL FLASH & EEPROM PROGRAMMER (1.8V 5V + ISP, USB)" is in sale since Friday, June 9, 2017. This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics".
The seller is "reveltronics" and is located in Warszawa. This item can be shipped worldwide.