Home Automation Kit

POPP Z-Wave Plus Energy Automated Weather Station

POPP Z-Wave Plus Energy Automated Weather Station
POPP Z-Wave Plus Energy Automated Weather Station
POPP Z-Wave Plus Energy Automated Weather Station
POPP Z-Wave Plus Energy Automated Weather Station
POPP Z-Wave Plus Energy Automated Weather Station
POPP Z-Wave Plus Energy Automated Weather Station

POPP Z-Wave Plus Energy Automated Weather Station   POPP Z-Wave Plus Energy Automated Weather Station

POPP - Energy Automated Weather Station. This device operates at 868.4 mhz Z-Wave frequency. Please make sure that you have a Z-Wave controller with the same frequency. 868.4 mhz is used in CEPT countries, Europe, the EU, China, Singapore, South Africa, UAE, Qatar, Singapore. The worlds first energy-automated Z-Wave sensor.

The multifunctional sensor is powered by a solar cell. Thanks to the energy management and the internal capacitor the wind sensor sends measures to the Z-Wave Controller even during the night. The built in energy manager automatically calculates and sets the wake up interval between 5 minutes (on sunny days) and 1 2 hours on cloudy days or at the beginning of the day.

Additionally, the energy management protects against full discharging and enables continous operation for reporting gusting wind, storm or dusk in case of emergency. The multifunctional sensor is able to capture and send different values via Z-Wave to the smart home center. In addition, Z-Weather samples the energy delivered by the solar cell.

The measurement is normalized to a solar cell of 1 square meter and reported with 16% efficiency in kWh. To calculate the wind yield, every eighth rotation is counted and the total sum is reported as Pulse. Thanks to Z-Weather you can trigger closing of the awning and blinds either by direct associated devices or scenes. Measures of the ambient light and the solar yield can be used to turn on the outdoor light at dusk time and turn the light off in the morning.

Before you can configure and use Z-Weather, the unit needs to be fully charged by direct sunlight for 4-6 hours. Without direct sun light, charging may take 12 hours.

Wind sensor using the Z-Wave technology. Use Z-Wave SDK 6.51. Multi-Sensor: air temperature, relative humidity, light intensity, wind speed, air pressure and dew point. It also provides data on the performance of the solar and wind energy.

Transmission distance: 50m free field, 30m indoor. Marking of protection IP 34 (IEC / EN 60529). Controls: Push Button 1, 1 LED. Maximum wind speed: 160 kmh. Dimensions (L x W x H): 33 x 30 x 11 cm.

The item "POPP Z-Wave Plus Energy Automated Weather Station" is in sale since Monday, November 9, 2015. This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics". The seller is "igl-ai" and is located in Ljubljana, default.

This item can be shipped worldwide.

  • Brand: POPP
  • Model: Weather Station
  • MPN: POPE005206
  • Country/Region of Manufacture: Germany
  • Connected Home Protocol: Z-Wave


POPP Z-Wave Plus Energy Automated Weather Station   POPP Z-Wave Plus Energy Automated Weather Station