Home Automation Kit

New! Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit

New! Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit
New! Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit
New! Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit

New! Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit   New! Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit
Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit. RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system.

Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched. RadioRA 2 Maestro dimmers incorporate advanced features such as fade on / fade off, delayed long fade to off, and rapid full on. RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications.

Remote dimmers / switches are available for multi-location control. Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits. On a single-tap, lights fade ON or OFF. On a double-tap, lights go to full ON. When ON, press and hold the tapswitch to engage the delayed long fade to OFF. Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached. Neutral and two-wire dimmers available. RadioRA® 2 Hybrid Keypads function as a dimmer and keypad combined into a single device. Hybrid Keypads are great for retro-fit applications since they eliminate the need to install two separate devices. RadioRA® 2 Hybrid Keypads have an available neutral wire terminal that allows them to be installed in either two-wire or neutral wire installations. Connecting the neutral wire to a Hybrid Keypad allows a lower minimum load to be used. Also, normal keypad operation will be available even if the attached load is not installed or if the lamp is burned out.

If a neutral wire is available in the wallbox it should be connected to the silver teminal on the Hybrid Keypad. If a neutral wire is not available and not desired, then the silver terminal should be tightened without any wires connected to it.

Hybrid Keypads can be installed in either single location or multi-location (with Remote Dimmer) installations. RadioRA® 2 Hybrid Keypads can be controlled as part of a lighting control system and incorporate advanced features such as fade on / fade off and rapid full on. RadioRA® 2 Hybrid Keypads feature large, easy-to-use buttons, plus a unique backlit engraving option that makes them readable any time of the day or night.

The Hybrid Keypad buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. RadioRA® 2 Hybrid Keypads include a Front Accessible Service Switch (FASST) for safe lamp replacement. Use only Lutron® Designer (Claro® or Satin Colors®) wallplates. Lutron® Claro® and Satin Colors® wallplates snap on with no visible means of attachment.

Replacement Kits are available in a variety of colors and with custom engraving to identify clearly each button's function. Keypad buttons are programmable to select scene or room preset levels or positions.

At the press of a keypad button, lights fade ON or OFF to desired levels and shades/draperies open or close to desired positions. Redeemable for one engraved Replacement Kit. Internal dimmer is assigned to top button by default. Tap top button to toggle load ON / OFF. Internal dimmer can be assigned to any button on the Hybrid Keypad and can be programmed to be controlled by any Keypad.

Can be installed in two-wire or neutral wire applications. Can be installed in either single location or multi-location (with Remote Dimmer) installations. RadioRA® 2 Repeaters extend the range of Radio Frequency (RF) signals that are sent between devices. Repeaters ensure error-free communication between system components and prevent interference from neighboring systems.

For systems that extend up to 30 ft (9 m), one (1) Main Repeater is required to set up the system. Up to four (4) Auxiliary Repeaters can be added to extend the RF range for larger system applications. Each Repeater has an RF range of 30 ft (9 m), covering a total area of approximately 2500 ft2 (232 m2). Test button: enters the system diagnostic mode. Can be programmed from a PC.

RS485 port to connect to other Repeaters through a wired link (daisy-chain). Main Repeaters allow configuration and integration to the system through Ethernet or RS232 ports (see chart to the right). System with 2 Main Repeaters must be connected via Ethernet. A provider of security products from door hardware, safe, home automation systems. We work closely with the top manufacturers in the door and hardware industry. We have been involved in the door and hardware industry for over 16 years working all the way from retail to wholesale.

We take pride in being a top rated customer service oriented company. For years we have worked closely with everyone ranging from architects to home builders, government agencies, hospitality industry and home owners whom are in the need of security products. We warrantee and represent that the goods are as described in the above listing.

We specifically disclaim any implied warranties of title, merchantability, fitness for a particular purpose and non-infringement. Customers should satisfy themselves that any item choice made is suitable for their intended purpose or use. We pride ourselves on our customer service.

All Electronic items are to be inspected, in working conditions also they are subject to be inspected for matching Serial numbers from our records. All Products has to be in Original Packaging, not used, all seals intact and in a perfect condition. Upon receipt Designer Entryway, LLC.

Will assess the condition of the product and will determine if a defect exist in the material/product and will be result for final judgment to determine the final credit. All Electronic items are to be inspected to be in working conditions also they are subject to be inspected for matching Serial numbers from our records. You may also be interested in.... Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit" is in sale since Sunday, August 6, 2017.

This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics". The seller is "designerentrywayllc" and is located in Kissimmee, Florida. This item can be shipped to United States.

  • Brand: Lutron
  • Model: RR-FDN-ADAPT-WH
  • Type: Lighting Controller
  • Bundle Listing: Yes
  • MPN: RR-FDN-ADAPT-WH


New! Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit   New! Lutron Foundation package RR-FDN-ADAPT-WH RadioRA2 G-ADAPTIVE Starter Kit