The CNAMPX-16X60 provides 16 channels of world-class audio amplification for the distribution of speaker-level audio to up to 8 stereo room zones as part of a complete Crestron Home® audio distribution system. Brilliantly designed to complement Crestron's PAD8 audio distribution processors, the CNAMPX-16X60 delivers a robust 60 watts per channel into 8 ohms, and 90 watts per channel into 4 ohms. Through the use of the optional CNXBRMO bridging interface, up to eight of the CNAMPX-16X60's sixteen outputs may be bridged to produce 220 watts per channel into 8 ohms. Its massive twin toroidal power transformers feature MOH cores for maximum efficiency, with bifilar windings directing pure, continuous power to each of the eight stereo amplifier modules.
Each module includes its own power supply fed by a separate set of transformer windings, producing astounding dynamic range and very low distortion in every room, all the time. The highest grade components mounted to multi-layer FR-4 glass epoxy circuit boards help guaranty a long life of trouble free operation. With more than 300 square inches of heat sink surface area per stereo module, cool, quiet, and reliable operation is ensured. Gentle power-up is achieved through a "soft-start" inrush current limiting circuit.
Quick-response opto-coupled output protection on each channel prevents failures caused by speaker line faults or signal spikes, providing exceptional dependability with no compromise to sound quality. In the unlikely case of a failure, Crestron's Detachable Modular Component design allows for rapid repair in the field. The CNAMPX-16X60 combines true audiophile performance with Crestron intelligence, allowing critical control and diagnostic information to be reported to the control system via the Cresnet control network. From the control system, the main amplifier power, as well as each stereo amp channel, can be individually turned on and off.
Faults within any amp module or the connected speaker lines are detected and reported to the control system, and amplifier temperature and output levels can be monitored. This valuable diagnostic information can be used by the control system to display a warning message on a touchpanel, reduce audio levels, or even activate an external cooling fan. Typical of 8 Stereo Room Outputs. 20Hz to 20kHz, all outputs driven at rated THD.
60 watts per channel at 8 ohms. 90 watts per channel at 4 ohms. 220 watts at 8 ohms bridged channels 1-4 and 13-16 only; requires CNXBRMO. 20Hz to 20kHz, +0/-0.1dB at 1 watt, 8 ohms.0.03% at full power. (16) RCA female comprising (8) unbalanced stereo line-level audio inputs; Input Impedance: 28k ohms; Connect to room outputs of CNX-PAD8A. (16) Dual 5-way binding posts comprising (8) stereo speaker-level audio outputs; Output Power: 60 Watts/Ch. 6-32 screw, chassis ground lug. (1) 4-pin 5mm detachable terminal block; Cresnet slave port, connects to Cresnet control network.
(1) IEC male and main fuse holder; IEC: Mates with removable power cord (included); Fuse: 3AG, 15 Amps, 250 Volts, fast-acting. (1) Toggle switch with (1) green LED, enables/disables main power if Cresnet power and mains power are connected. (1) green LED, indicates 24 Volts DC power supplied from Cresnet control network. (1) yellow LED, indicates communication with Cresnet system.
(1) miniature pushbutton and (1) red LED, overrides control system to activate main power and enable all room output channels; Cresnet power and mains power must be connected; also used for touch-settable ID (TSID). 120 Volts AC ±10%, 50-60 Hz, 1800 Watts.
41° to 104°F (5° to 40°C). 10% to 90% RH (non-condensing). Black metal, 4U 19-inch rack-mountable (rack ears included). 7.69 in (19.53 cm); 7.0 in (17.78 cm) without feet.17.18 in (43.64 cm); 19.0 in (48.26 cm) with rack ears. 17.45 in (44.32 cm). 90.2 lbs (41.0 kg). All the features and specifications of the CNAMPX-16X60 except. (16) Dual binding posts comprising (8) stereo speaker-level audio outputs; (Banana plugs prohibited); Output Power: 60 Watts/Ch. (1) IEC male and main fuse holder; IEC: Mates with removable power cord (included); Fuses: (2) M205, 8 Amps, 250 Volts, fast-acting. 230 Volts AC ±10%, 50-60 Hz, 1800 Watts. The item "Crestron Professional Audio Amplifier CNAMPX-16X60" is in sale since Sunday, November 13, 2016. This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics".
The seller is "erilycet-0" and is located in Huntington Beach, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Croatia, Chile, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Bahamas.