Home Automation Kit

Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes

Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes
Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes
Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes
Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes
Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes
Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes
Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes
Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes
Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes
Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes

Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes   Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes

Control4 Lot - This will be packaged in one box and items will be individually package in that box. Currently running 2.9.1 firmware. Checked with the power supply you see in the pictures. The Zigbee antennas come with it along with the contact connectors seen in the pictures. Cosmetically, it looks near perfect.

No damage or dents to the unit. Lived its life in a rack. Front panel look near new. This is fully functional unit but wasnt connected to the system when I posted/setup this.

I connected it quickly and fired up. The touch panel has no problem touching it or activating displayed buttons. No black spots or defects in that area. This touch panel was at the rack location in the basement but I modified a portion of the basement and never reconnected/reinstalled it. This is currently running somewhere in the 2.5. It comes with the back box but it is missing the wings. I will include standard blue wings from a typical electrical box.

Cosmetically, this unit has no visible scratches on the touch panel. The only thing that would be worth noting is that it is missing the electrical pig tails so it would need to be powered via POE.

Both are fully functional and still connected to the system so you would have to reset them upon applying to your system. I did not check the firmware but works with 2.9.1. There are no bad buttons on the remote and connects to the controller without issue. One the tab for the battery door broke so I simply applied electrical tape to it.

I havent had any issues with using it or falling off with this method. Not noticeable while using but obviously visibly noticeable looking at the back of the remote.

The front of this remote is fine with only light scratches on the screen portion. The other remote has a dent in the top left of the remote and scratch again at the top left.

The battery door is fine on this one and without issue. All buttons work without issue and currently attached to the system here so they would have to be reset to apply to your setup. I dont know the firmware of the remote but works currently with 2.9.1.

The item "Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes" is in sale since Saturday, February 23, 2019. This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics". The seller is "mr2partbuyer" and is located in Perkasie, Pennsylvania.

This item can be shipped to United States.
  • Brand: Control 4
  • Custom Bundle: Yes
  • Modified Item: No
  • Bundle Description: Control4 HC-800-BL-1
  • Smart Home Protocol: Wi-Fi
  • Smart Home Compatibility: Amazon Alexa

Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes   Control4 Lot HC-800-BL-1 Controller, 7 Touchscreen, (2) SR250 Remotes