Home Automation Kit

AEOTEC Z-Wave Energy Meter Gen5 60A with three clamps

AEOTEC Z-Wave Energy Meter Gen5 60A with three clamps
AEOTEC Z-Wave Energy Meter Gen5 60A with three clamps
AEOTEC Z-Wave Energy Meter Gen5 60A with three clamps

AEOTEC Z-Wave Energy Meter Gen5 60A with three clamps    AEOTEC Z-Wave Energy Meter Gen5 60A with three clamps

AEOTEC - Energy Meter Gen5 60A with three clamps. Please make sure that you have a Z-Wave controller with the same frequency.

This frequency (868.4 mhz) is used in. CEPT countries, Europe, the EU, China, Singapore, South Africa, UAE, Qatar and Singapore. These days you hear a lot about saving energy.

The Aeotec's Z-Wave Home Energy Meter provides you the possibility to understand that. Installed in an electricity box, the energy meter will monitor the total consumption of electricity used by an entire building. Its intelligent clamps will report this energy use in watts or kilowatt-hours to your Z-Wave gateway or controller, in watts or kilowatt-hours. Almost in real time you can see how much electricity you really use and when you use it. The main body is anchored using a back mount.

The device has three clamps and reports W and kWH (up to 60 Ampere). Clamp meter for electricity box. 3 phase meter for max. Report in watts, kilowatt-hours and real time. Power: 90...260 VAC, 50/60 Hz. Measuring range of voltage: 220V... Measuring range of current: 0...60A. Dimensions: 96 x 70 x 230 mm.

100 x 75 x 190 mm. 67 x 172 x 187 mm. The item "AEOTEC Z-Wave Energy Meter Gen5 60A with three clamps" is in sale since Wednesday, April 4, 2018. This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics".

The seller is "igl-ai" and is located in Ljubljana, default. This item can be shipped worldwide.

  • Connected Home Protocol: Z-Wave
  • Model: ZW095C3A60
  • MPN: AEOEZW095C3A60
  • Brand: Aeon Labs


AEOTEC Z-Wave Energy Meter Gen5 60A with three clamps    AEOTEC Z-Wave Energy Meter Gen5 60A with three clamps