2000M DC Power 12V 1 CH RF Radio Remote control system kit Controlled On/Off Switch with antenna 3 Modes. 1CH DC 9V 12V 24V Wireless Remote Control Transmitter Receiver For home automation 10A 2000M. This 1 channel DC power rf long range remote control kit operates in toggle, momentary and latched control mode (set the mode as you like freely). It is great for hard to reach lights or other DC/AC electrical devices, remote distance is up to 2000m. Widely used for light remote control, electric gate remote control, electric window / blind remote control, etc.
1 x Receiver: S1U-DC09-ANT2 / S1U-DC12-ANT2 / S1U-DC24-ANT2 (1 Channel / Three Control Modes). Wireless control, easy to install. Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC110240V or DC028V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
With reverse power protection and over current protection. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes.
Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically). Model No: S1U-DC12-ANT2 / S1U-DC09-ANT2 / S1U-DC24-ANT2. Control Modes: Latched, Momentary, Toggle. Working Voltage Range of Relay: AC110240V or DC028V.PCB Size: 67mm x 50mm x 18mm. Case Size: 75mm x 54mm x 27mm. Anti-interference, waterproof, shielded wire set inside. Magnetic stand design for easy to install.
Remote Control Distance: 1000m / 3000ft (theoretically). Encode: Fixed code by soldering. Unit size: 135mm x 42mm x 25mm.Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months). Setting control mode Toggle: Connect Jumper-2. Control mode Toggle: Press -> On; Press again -> Off.
Press big button: Turn on the relay (connect B and C, disconnect A and B) Press big button again: Turn off the relay (disconnect B and C, connect A and B). Setting control mode Momentary: Connect Jumper-1. Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold big button: Turn on the relay (connect B and C, disconnect A and B) Release big button: Turn off the relay (disconnect B and C, connect A and B). Setting control mode Latched: Disconnect Jumper-1 and Jumper-2. Control mode Latched: Press -> On, other relays Off; Press another button -> Off. Press big button: Turn on the relay (connect B and C, disconnect A and B) Press small button: Turn off the relay (disconnect B and C, connect A and B). We are not responsible for wrong address.The item "1CH 6V 9V 12V 24V 2000M RF Long Range Remote Control Kit Transmitter & Receiver" is in sale since Wednesday, August 7, 2019. This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics". The seller is "carymart-usa01" and is located in shen zhen. This item can be shipped worldwide.