Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it means you learn it successfully. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control. Remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully. Self-lock ---connect the JP1 with the cutting out cap.Jog---the cutting-out cap is non-occupation, JP1 and JP2 do not connect either. Inter-lock---- Connect the Jp2 with the Cutting out cap, Jog---- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control). Self -lock----- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock-------press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control). Quiescent condition :less than 6mA 3. Working temperature :-40'c+80'c 4.
Receiver sensitivity : more than -105dBm 5. Working frequency :315MHz here is in set. We have made it work together , so you don't have to care about what frequency are they. Output voltage:DC and AC is optional 7. Output current : less than 3A 8.
Max load current:10A 9. Code Type: Fixed code / Learning code. Dimensions: 58 x 39 x 14mm. We are not responsible for wrong or undeliverable address. The item "12V 4CH Channel Wireless Remote Control Radio Relay Switch Transceiver Receiver" is in sale since Tuesday, July 5, 2016.
This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Other Smart Home Electronics". The seller is "zaeem458" and is located in Humble, Texas. This item can be shipped to United States.